04. BALL

Ball Valve

The element with an opening is held with two pieces of valve seats and it rotates 90 degrees to be open and close.

The rotary type (or quarter-turn type) whose stem spins on the spot makes it easy to fully open and close; it is excellent in operability and visibility.

In addition, it has little irregularities inside of the valve and causes quite little pressure drop, which is one of the exceptional features of the valve. There are several types such as "standard bore" or "reduced bore," in which the opening hole diameter is smaller than the inside diameter of the valve.

We deal with valves compatible with special requirements such as high pressure gas certified valves and oil prohibited products.

SPECIFICATION

Body material: JIS, ASTM, ASME various cast / forged steel materials / carbon steel, stainless steel, blue brass type
Fluids: water, steam, gas, oil etc.
Pressure class · Nominal diameter: Class 150Lb ~ 2500Lb, ~ 60 "/ JIS 10K ~ 63K, ~ 1500A
Connection type: socket welded type, butt welded type, threaded type, flange type *
Operating method: Manual operation (including manual reduction gear included), electric operation, pneumatic operation

* In the case of flange type, please indicate surface shape (Raised face (RF) · Flat face (FF) etc) per flange standard (ASME, JIS etc).
● The above specifications are standard range. Because we will select individually according to usage conditions and uses,
Please show flow condition etc.

In addition to general ball valves, we also handle Trunnion type ball valves, V port ball valves, Eccentric ball valves, Top Entry type ball valves.